Do you need to fine tune your winding traverse stroke length to improve spooling accuracy
As an alternative to the standard manually adjustable end stops on Amacoil-Uhing traverse drives, an option is now available for fine adjustment of traverse travel distance.
Are you changing the length of travel on your Uhing traverse drive?
Changing travel length of a Uhing traverse drive assembly is usually a simple matter of moving the end stops. But sometimes this simple adjustment can cause problems. Here's how to avoid the problems and make sure your Uhing traverse works like a charm.
The numbers game
Regarding your Uhing traverse drive unit, getting the information you need depends on knowing what numbers to use off the drive box.
It doesn’t always make “sensor”
Do you want to add sensors and electronics to your Uhing traverse? Better read this first!
It’s a friction drive
That means that the bearings put a significant "bite" on the shaft. Anything you do in your set up to interfere with that "bite" will cause problems for you.